|
| PELLET BOILER ULMA 2000 |
|
 |
 |
|
| Maximum working pressure |
1,5 bars |
| Flue funnel |
120 x 120 mm |
| Water volume |
200 L |
| Minimum chimney area |
80 cm2 |
| Burner connection hole |
Ø 154mm |
| Hearth depth |
350mm |
| Hearth height |
350 mm |
| Electrical connector |
400 VAC |
| Warranty |
5 year |
| Minimum under pressure |
1,5 / vp |
| Efficiency |
ca 90-92% |
| Maximum effect |
20kW |
| Hot water loop |
11m |
| Immersion heater |
6kW |
|
|
| Information |
The ULMA boiler is a compact and flexible boiler that is also, from the beginning, equipped with shunt automatic system and indoor sensor. As a standard, the boiler has a 6kW immersion heater that is working in three power levels. Built into the boiler is also the feature that it sets the alarm off by itself when sweeping is needed. The ash pan needs to be emptied with a maximum of about 2-3 times per year depending on the consumption of the house and contains about 45 liters of ashes. The efficiency is very high since we have adjusted the boiler to our burners and it is not a boiler that fits all kinds of burners. The boiler is therefore sold as standard with our pellet burner ULMA 2000 TC.
|
 |
|
|
| The boiler has a built-in PLC steering device that handles the shunt automatic system and on the display you can also read the boiler temperature and flue gas temperature out from the boiler. On the panel you can choose between pellets and electricity if you wish. Smaller light emitting diodes show what power the immersion heater is working with at the moment. The immersion heater can also be adjusted so that if you leave your home for a longer time, and want to keep minimal temperature without pellets, that is possible. If you wish you can also type in today’s kW price on electricity and read on the display what the immersion heaters have consumed. The boiler also has an alarm indication that shows if there is an error while the boiler is running. |
 |
|
|
Road map
Friday the 18 May 2012
Information about Cookies on www.ulma.se
