The ULMA-burner can be mounted on most boilers on the market today via the enclosed mounting sleeve coupling. The burner is equipped with a PLC system that handles the operations and burner safety controls.

The burner is ignited with an electronic igniter when the boiler temperature falls below the preset temperature.It has an adjustable hysteresis on the thermostat via the PLC for the best use. The display also shows the boiler temperature.

The ignition system automatically ignites the fuel within 80 seconds after the thermostat of the burner has called for heat. The burner is now in full operation. On the PLC display you can also see what power output the burner is operating at.
The burner can run on a high or low power output level and is easy for the installer to adjust with a flue gas instrument. You can also set it on auto mode, the burner then decides what power it will go on depending on the abstraction of energy made
.

ULMA 2000 TCA is easily cleaned since the burner is equipped with an automatic cleaning system that cleans the chamber unit with compressed air. The cleaning procedure can be adjusted depending on the quality of the pellet. A compressor is included in the delivery. GSM alarm as an option.